Forum > Modifications
Hoofies How to
Jason:
How to assemble and fit Hoofies
To start this is what you get to make a Hoofie (you get 2 in a set ;D )
If you have the later bolt on rubber hoofs you will have 2 large washers and 2 small (for each hoofie)
Jason:
Take a bolt, washer and the short nylon strap and assemble thus
Jason:
Now thread the bolt through the rubber base like this
Jason:
Next bend the front of the rubber base back and thread the bolt through the front hole
Jason:
Fit a washer and nut to the bolt
On the later bolt on rubber type these washers on the inside are the small ones
Navigation
[0] Message Index
[#] Next page