Pro-Jump PowerBocking Jumping Stilts Forum - Community for Power bocking / Pro Jumping!
YOUR JUMPING STILTS => Modifications => Topic started by: Shadon Oufrayor on December 14, 2007, 04:52:40 PM
-
Hey,
Just got a pair of Pro-jumps and i need to tape the springs. I know a few layers of electricians tape will do it, but i also wanted to customise them so that they have a picture of a flame running up the spring.
I went to a car graphics shop to see if they could do anything but the stuff they use wouldn't stick properly.
Any ideas anyone???
Thanks
Shadon
-
Not so sure what spray would work on tape but you can use tape to do the design on and then just stick it on
I love the design on steve76's springs and he used tape too
(http://www.projumpforum.co.uk/gallery/558_01_08_07_12_03_55.jpg)
Jason's uses a different technique like a sleeve which he can put on and off and can customise
(http://www.projumpforum.co.uk/gallery/311_05_12_07_11_47_35.jpg)
-
You don't want pictured tape on them this time of year !?
I've got tinsel, flashing fairy lights and stars on the top and couple of ......... wait and see ;)
This is the first go at making my Xmas trees ( people love them ) :)
http://www.projumpforum.co.uk/index.php?action=gallery;sa=view;id=558 (http://www.projumpforum.co.uk/index.php?action=gallery;sa=view;id=558)
-
Does Jason have a specific photo/thread regarding his Graphic type Sleeves?
I'd rather look it up before sending a pesky PM :P
-
at the moment just the photos in the gallery :)
-
does jason make the sleeves for him self or is he thinking of selling a few :) i would love one of those banned bockers ones :angel: they look mint!
-
I'm getting together some templates for the Slippies (Thanks for the silly name Naz I couldn't have done better myself ;))
I need to make them a bit adjustable as different people wrap their springs to different widths, the overlap on the velcro can give about 1/2" adjustment but needs to be right
Don't know how much they would cost to make the first two sets took ages but with the templates and a plan it should get a lot shorter
As for the Flame design I did try to do this on the first set but I couldn't find a flame design that looked any good on the springs they are to narrow
So if any of you budding artists know of or can draw a good Flame design (I would like a set too) black going into red ,yellow and white would be good then the white would be at the top and stay clean :laugh:
The Banned Bockers design was printed on a fairly thin material and I don't think they will last long but the Pro-jump ones were on a good cotton twill and should last a fair while
I have a few days off this week so I should be able to get to the shop that i bought the good stuff from and see if they have any other colours (like black) and if there is enough interest I'll work out a price
-
I'm getting together some templates for the Slippies (Thanks for the silly name Naz I couldn't have done better myself ;))
I'm certain thats what you called them lol :-[ I have no clue where that came from then lol
Oh No now I'm thinking up silly names for mods :o
-
I'm getting together some templates for the Slippies (Thanks for the silly name Naz I couldn't have done better myself ;))
I'm certain thats what you called them lol :-[ I have no clue where that came from then lol
Oh No now I'm thinking up silly names for mods :o
I know why you think that !?
Jason does write SLIP, SLIPPY and SLIPPED a lot in his posttings :-\
Don't know why ;D
-
I'm getting together some templates for the Slippies
i just read that as i m getting some toothpaste for the strippers hahahaha
-
@ Magzzie - too much info ::)
@ Jason - I knew I wasn't going bonkers - you mentioned your spring sleeves as slippies or coveries in the gallery, I guess slippies stuck in my head ;) http://www.projumpforum.co.uk/index.php?action=gallery;sa=view;id=334
-
Opps I slipped up there ;D
Sorry Naz I had no recolection of that, shows how old I must be getting thank god for you youngsters that can still remember more than a day ago ;D
Well they've been named now and I can't even blame the silly name on you :laugh:
-
I dont mind taking credit ;D
-
As for the Flame design I did try to do this on the first set but I couldn't find a flame design that looked any good on the springs they are to narrow
So if any of you budding artists know of or can draw a good Flame design (I would like a set too) black going into red ,yellow and white would be good then the white would be at the top and stay clean :laugh:
I am, as we speak, researching and producing decals designs for PowerBock springs, I am investigating ways of producing them in personal packs that people can buy. I will keep you all posted! All designs shall be my own work and I can give you my word none will be taken from other artists without their permission (I have personal experience of people making a LOT of money from one of my peices of art). Its looking promising so watch this space!!!
-Carma (The Bocking Rocker)
-
I'm getting together some templates for the Slippies
i just read that as i m getting some toothpaste for the strippers hahahaha
Where did that come from ? If you do a search your quote is the only place you'll find it ( well here to now !? ) !
-
hmmm carma can u design like flames for a template for my springs?? if u could i would love u soo much :biggrin:
friendship love of course :thumbs: :banana:
-
I'm getting together some templates for the Slippies
i just read that as i m getting some toothpaste for the strippers hahahaha
Where did that come from ? If you do a search your quote is the only place you'll find it ( well here to now !? ) !
Its Magzzie, he doesnt need an excuse to be weird! LOL! :thumbs: