Pro-Jump PowerBocking Jumping Stilts Forum - Community for Power bocking / Pro Jumping!

YOUR JUMPING STILTS => Everything PowerSkips => Topic started by: lynch on July 01, 2009, 10:00:04 AM

Title: moving foot plate
Post by: lynch on July 01, 2009, 10:00:04 AM

im planing on making a moving foot plats for my A2 project
but i need pics of the foot plate, the manual or if anyone could lend me a moving foot plate i only need the one to look at and you will get it back if any one could help me pm me

Title: Re: moving foot plate
Post by: Bexx on July 01, 2009, 10:06:23 AM

your best asking the Almighty Jason Boc Doc .....

I saw his hybrid bocks the other weekend..... they are sweeeeeeeeet as cherrry pie

Title: Re: moving foot plate
Post by: darfgarf on July 01, 2009, 11:19:06 AM

just remember if you intend to use em, make sure they're strong and not made from the scrap metal bin  :Claugh:

Title: Re: moving foot plate
Post by: lynch on July 01, 2009, 11:29:39 AM

i will be making them for use but do really need a example to work from :P i hope it all works out

Title: Re: moving foot plate
Post by: Jason on July 01, 2009, 06:51:41 PM

I take it you have access to a machine shop lynch and can read a drawing

I did some sketches of the moving foot before I made one so I'll have a look and see if I can find them

To make them work you will need to make 3 bits for each foot

A back section, a front section and the bar that attaches to the footplate adjustment rods

I did drawings of the first two but the third one I just copied

Jason  :Hoofies2: :CGEEK:

Title: Re: moving foot plate
Post by: lynch on August 17, 2009, 10:42:42 AM

would be be able to bring them to CB please

Title: Re: moving foot plate
Post by: Jason on August 17, 2009, 08:28:37 PM

Yep Mate I had forgotton about this I shall search out the drawings and you can take all the pics you want  :Csmile:

See you there

Jason  :Hoofies2: :CGEEK: