Author Topic: Bit's that have fell off, answers on a postcard please (Read 7913 times)

drew · « **on:** December 25, 2006, 07:25:25 PM »

Evening, on my first day out with my ProJumps, a bit fell off. I'm guessing this is required and should be put back? Small white spacers which look like the letter T, they fit in at the bottom of the spring on either side.

Locky · « **Reply #1 on:** December 25, 2006, 09:10:34 PM »

I'm not sure what you mean but I've had a look on mine and cannot see anything resembling that.
Any chance of some pics to show what you mean exactly?

drew · « **Reply #2 on:** December 25, 2006, 10:23:01 PM »

Unfortunately my webspace is down at the moment, so I cannot upload the pictures, but they are small white plastic tabs, which fit under the pivot point at the bottom of the spring, and are tucket inside the black rubber which incases the spring at each side.

Will post the photo once my webhosting support is back on line.

freakazoid · « **Reply #3 on:** December 26, 2006, 01:47:12 AM »

one of mine fell off as well it is no big problem just slide them back in.......hope this helped

stevie · « **Reply #4 on:** December 26, 2006, 01:55:15 AM »

they are on the newer model, they act as a shock absorber, they do fall out but you get used to it after a short while, its the same on mine and brucie's,they have all falen out and i cant be botherd putin them back in,its no prob, im recomending a slight change.

drew · « **Reply #5 on:** December 26, 2006, 05:04:26 PM »

Thanks for the replies, put mine back in and they've stayed in. Although I'm now wearing elbow pads after I took the skin of both of them, after slipping on swan do-dah, while running around a lagoon, slightly leaning into the corner.

What fun this is, I'm sure I'll get some air time of more than a foot eventually

drew · « **Reply #6 on:** December 27, 2006, 01:04:15 AM »

Just found the attachment option in "Additional Options", so here is the picture, just in case anyone is wonder what part is being discussed

English-tailor · « **Reply #7 on:** December 27, 2006, 04:20:57 PM »

Quote from: drew on December 27, 2006, 01:04:15 AM

Just found the attachment option in "Additional Options", so here is the picture, just in case anyone is wonder what part is being discussed

Glad you posted this it made me look at mine and the very same piece was about to fall out....will sort it out as soon as I get home

dragon · « **Reply #8 on:** December 28, 2006, 12:29:07 AM »

i feel abit left out i havent got them but if they keep on falling out i dont think i want them

wilfengel · « **Reply #9 on:** December 28, 2006, 03:31:13 PM »

one of mine fel out today and it had snapped in half so do you think its a vital part? where whould i be able to get a new one or any ideas for making a new one?

arthur · « **Reply #10 on:** December 28, 2006, 10:52:39 PM »

one of mine fell out and I tried putting it back in but it didnt fit so i put it in place over the spriong portection part and taped it in place and it hasnt fallen out. If you want to replace one then i think myabe a thing peice of rubber/plastic will do and just tape it with some electrical or hockey tape if u have some left over from doing the springs.

Hope this helps.

psibeck · « **Reply #11 on:** December 30, 2006, 07:58:15 PM »

yeh this happened to me this yesterday.. out bouncing and i heard this rattling and one of those white T shaped things had appeared all crack to pieces... the uther one feel out as well and it cracked. so now my left foot rattles $:-\$ so what should i do? just leave it cos it seems fine and if its only on the new models... if you asked me it should be attached better and more sustainable!!!!!

Locky · « **Reply #12 on:** December 30, 2006, 08:52:36 PM »

Should I be worried? I dont thin I ever had one of these plastic things. If I did, they both fell out before I even noticed and are long gone?

Am I missing out?

I want a plastic thing too lol

arthur · « **Reply #13 on:** December 31, 2006, 02:41:27 PM »

matt i think you recieved yours before they put those update things on because i have some on mine and i only got mine a few weeks ago..................its nothing mager to worry about otherwise they would have had them when they first started making them.

nundrian · « **Reply #14 on:** January 13, 2007, 08:46:15 AM »

white plaggy bit fell out on 1 of mine too. Bunged it back in and used a bit of gaffa tape to hold it in place. Seems to have worked.

Kiola · « **Reply #15 on:** January 13, 2007, 12:59:03 PM »

yea.. it is needed to plug the gap.. i had the same problem .. and i filled the gap wit hcardboard and coloured tape.. and its a world of difference with and without a gap plugger.. either tape tem back in or if they break.. then use something else like cardboard

K.

Seth · « **Reply #16 on:** March 24, 2007, 11:07:27 AM »

thanks so can u recomend anything to use 4 this??? because surely cardboard would break or wear away really quickly???

freakazoid · « **Reply #17 on:** March 24, 2007, 06:35:37 PM »

Quote from: Seth on March 24, 2007, 11:07:27 AM

thanks so can u recomend anything to use 4 this??? because surely cardboard would break or wear away really quickly???

ive done kiolas genius idea of putting cardboard in it because even tho it will prob wear away pretty quick its the most cheapest easiest option
10/10 for the cardboard idea

Kiola · « **Reply #18 on:** March 26, 2007, 01:28:13 PM »

i have done new mods to this idea.. but now that im back in plymouth i have no stilts to do the mod and show you all.. so be patient and ill show you a new addition to my mod..

if stevie reads this and cantake pics of what ive done to that pair of stilts i was useing .. can you post some pics of what ive done.. thanks

Jason · « **Reply #19 on:** March 26, 2007, 09:47:37 PM »

I've done a mod on mine (fell out after 45 mins use) using a piece of a 5 gallon water drum and after 1 hours use it seems to have cured it I posted it in
General chat
http://www.projumpforum.co.uk/index.php?topic=473.0

Tell me what you think

Kiola · « **Reply #20 on:** March 26, 2007, 10:37:49 PM »

yea i saw that.. try to really push something into the gap .. so theres ABSOLUTELY NO gap at all.. literally FORCE something in to stop it moveing! that looks pretty thin.. mabie glue 2 together if theres still give in ther?

Jason · « **Reply #21 on:** March 26, 2007, 11:37:32 PM »

It's slightly thicker than the original packer but a bit softer so it won't break up like the others there seems to be very little movement but the rubber pad behind the spring gives a little which I think is a good idea

Like they say if it won't flex it'll snap

I put a couple more pic to show it better

aI managed to get some thicker strips off of a cable drum now that stuff is really tough like lexan you can beat it with a hammer and it just takes it and come back for more

Kiola · « **Reply #22 on:** March 27, 2007, 09:39:50 AM »

nice....

News:

Author Topic: Bit's that have fell off, answers on a postcard please (Read 7913 times)